内页banner
Search
  • Introduction of Wall Panel Production Line Nov 08, 2017
    (Compound) heat preserving lightweight wall panel adopts the newly high technology from South Korea, which is produced with the policy of lower investment but higher profit. The production line is made up ofEPS pre-expander machine,JQ2000 lightweight aggregate mixer, ZP120 foam blowing machine, slurry-infusing container, hydraulic wall panel machine, moving automatic stacker It includes five systems:Batching System,Mixing System, Slurry-infusing System, Molding System, and Automatic Demoulding System. ▲Batching System It includes four parts: silo, screw conveyor, electronic scale and aggregate bunkers. ▲Mixing System It includes two parts: JQ1000 Lightweight aggregate mixer and ZP 120 foam blowing machine. ▲Slurry-infusing System It includes two parts: pressure vessel and air compressor. ▲Molding System The molding system adopts hydraulic pressure as motivate, which has specialty of reasonable structure, easy operation, high productivity, beautiful outlook; the machine is leading the w...
  • Talk something about lightweight sandwich wall panel Dec 28, 2018
    Today, Let is talk something about Lightweight sandwich wall panel. Lightweight wall panel is specific produced for modern architecture, ecological residence, frame structure and lower construction, the birth of wall panel marks the renewal of the wall material, new leap has been made in the modernization of wall materials. The birth of this product replaces the traditional block process, it meets the wall material requirements with new energy saving energy and waste building concept and excellent performance of the modern building. Wall panel is composed of cement, fly ash, EPS (expanded polystyrene foam particles), foam agent, and some additives (hydroxymethyl cellulose, reusable dispersion emulsion powder),  mixing with water according to certain proportion, then grouting and forming.face board can use cement board, calcium silicate board, plasterboard or glass magnesium board. Lightweight sandwich wall panel is not only widely used in various kinds of high and multi-storey non...
  • Light Weight Wall Panel, Hollow Block, AAC Block Specification Comparison Apr 10, 2020
    Light Weight Wall Panel, Hollow Block, AAC Block Specification Comparison Light Weight Wall Panel, Hollow Block, AAC Block Time Comparison A comparison of the time taken to build finished and ready to paint on both sides (wall area 16 sqm)
  • Introduction on raw material of lightweight EPS wall panel Apr 17, 2020
    Introduction on raw material of lightweight EPS wall panel     Since ancient times masonry walls are the main component in the housing sector and it has brittle characteristics and exhibit poor performance against the uncertain loads. Further, the structure requires heavier sections for carrying the dead weight of masonry walls. S.L Machinery develops a simple, lightweight and cost effective technology for replacing the existing wall systems. The lightweight concrete is developed for the construction of sandwich wall panel. The EPS beads of 4-6 mm diameter size are mixed with cement concrete and developed a lightweight concrete with a density 9 kN/m³. Sandwich wall panel is composed of cement, fly ash, EPS (expanded polystyrene foam particles), foam agent and additives (such as hydroxymethyl cellulose, reusable dispersion emulsion powder, water reducing agent etc.), mixing with water according to certain proportion, then grouting and forming. The lightweight sandwich pan...
  • Main raw material used for lightweight concrete Jul 24, 2020
    DURING THE INDUSTRIAL REVOLUTION of the 18th and 19th centuries, the basic materials of construction were sparse. There was wood, stone, brick and mortar, and iron and steel. However, the irons and steels of that day were vastly inferior to the ones used today. With the progress of human civilization and the pursuit of a better quality life, today S.L Machinery perfectly combined the technology of Lightweight wall panel material and steel structure by launching the lightweight concrete wall panel making machine.     Lightweight concrete is now an established lightweight building material. It is used not only on account of its light weight but also because of high thermal insulation compared with normal concrete. The lighter the concrete, the larger the insulation properties in general. An earliest application of lightweight concrete was in building industry and for producing insulating screeds. The principal structural use of lightweight concrete is in construction of under b...
  • Introduction on Light Weight Foam concrete Plant May 10, 2021
    Introduction on Light Weight Foam concrete Plant The light weight foam concrete block is a kind of foaming agent that is fully foamed mechanically through the foaming system of the foaming machine, and the foam is uniformly mixed with the cement slurry, and then injected into the mold to be formed. It is formed by natural curing, a new type of lightweight thermal insulation material with a large number of closed pores. It is a bubble-shaped heat-insulating material, and its outstanding feature is that the closed foam cells are formed inside the concrete, so that the foamed concrete block can achieve the effect of light weight and thermal insulation.    The light weight foam concrete is prepared by directly adding hydrolyzed natural resin foaming agent to cement concrete or prefabricating a large amount of foam without adding perlite, polypropylene EPS beads and other materials. The main feature of this kind of foam is that its water absorption rate is less than 5%, no connect...
  • Thermal Insulation Wall Panel Captured the Construction Market in Middle East Dec 29, 2022
    The 32nd. Riyadh International Construction Machinery Fair,Saudi Build proceeded in Riyadh International convention &exhibition center (RICEC) during Nov.14-17,2022. This exhibition covered HVAR, Stone Tech and other topics, and coincided with the time of 23rd. Saudi Elenex. S.L Machinery attended the 32nd. Saudi Build and acquired good effect.Some customers came to our booth and left their business cards with advising us to contact them after the exhibition ending. Some customers were going to build wall panel factories,they had many questions about wall panel machines and the operation of production line.Some were looking for simple production line of block making machines and expressed they would like to cooperate with us in the near future.   S.L Machinery founded in 1993,committing to global environmental protection and pursuing for the achievement of perfect buildings ,has acquired more than 150 technology patents and a number of scientific research achievements.S.L Mach...

Need Help? Chat with us

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit

Home

Products

skype

whatsapp