Introduction on raw material of lightweight EPS wall panel     Since ancient times masonry walls are the main component in the housing sector and it has brittle characteristics and exhibit poor performance against the uncertain loads. Further, the structure requires heavier sections for carrying the dead weight of masonry walls. S.L Machinery develops a simple, lightweight and cost effective technology for replacing the existing wall systems. The lightweight concrete is developed for the construction of sandwich wall panel. The EPS beads of 4-6 mm diameter size are mixed with cement concrete and developed a lightweight concrete with a density 9 kN/m³. Sandwich wall panel is composed of cement, fly ash, EPS (expanded polystyrene foam particles), foam agent and additives (such as hydroxymethyl cellulose, reusable dispersion emulsion powder, water reducing agent etc.), mixing with water according to certain proportion, then grouting and forming. The lightweight sandwich pan...

Light Weight Wall Panel, Hollow Block, AAC Block Specification Comparison Light Weight Wall Panel, Hollow Block, AAC Block Time Comparison A comparison of the time taken to build finished and ready to paint on both sides （wall area 16 sqm）

Foam concrete block is foamed by the foaming machine. The foam agent is fully foamed by mechanical way , and the bubles mixed with cement evenly, then injected into the mold, forming a new lightweight thermal insulation material which contains a large number of closed pores. It is a bubble like insulation material, which is characterized by the formation of closed foam holes so that the foam concrete blocks are lightweight and heat-insulation. Main raw materials: cement, fly ash, fiber, foam agent, and additives. These raw materials are mainly inorganic. There are no harmful substances and no odor. No decomposition in the application process, which is green and environmentally. The foaming agent is neutral and without harmful substances such as benzene and formaldehyde, it avoid environmental pollution and potential fire hazards. It is the best choice for the insulation building. The process of production Material weighing - material mixing (adding foam agent, additives, etc.) - materi...

Today, Let is talk something about Lightweight sandwich wall panel. Lightweight wall panel is specific produced for modern architecture, ecological residence, frame structure and lower construction, the birth of wall panel marks the renewal of the wall material, new leap has been made in the modernization of wall materials. The birth of this product replaces the traditional block process, it meets the wall material requirements with new energy saving energy and waste building concept and excellent performance of the modern building. Wall panel is composed of cement, fly ash, EPS (expanded polystyrene foam particles), foam agent, and some additives (hydroxymethyl cellulose, reusable dispersion emulsion powder),  mixing with water according to certain proportion, then grouting and forming.face board can use cement board, calcium silicate board, plasterboard or glass magnesium board. Lightweight sandwich wall panel is not only widely used in various kinds of high and multi-storey non...

Wall Panel Production Line Regarding the lightweight wall panel production line, below information is for your reference: 1.We are the first supplier in China for the wall panel machine, our company has almost 25 years history; 2.We can provide many technologies wall panel production lines for customers’ choice, there are Horizontal type and Vertical line, has manual, semi-auto, and auto line. Customers can choose according to their capacity request and investment budget. Difference between Vertical wall panel line and Horizontal wall panel line Horizontal type line enhances the working performance on the basis of the vertical line. Not only avoid some security operational risks of the vertical line, also enhance the production line working efficiency. The horizontal line also can be reserved an automatic quantitative slurry infusing system, auto mold & face board installation system, auto mold cleaning & oil spraying system etc.. Production line specific difference a...

(Compound) heat preserving lightweight wall panel adopts the newly high technology from South Korea, which is produced with the policy of lower investment but higher profit. The production line is made up ofEPS pre-expander machine,JQ2000 lightweight aggregate mixer, ZP120 foam blowing machine, slurry-infusing container, hydraulic wall panel machine, moving automatic stacker It includes five systems:Batching System,Mixing System, Slurry-infusing System, Molding System, and Automatic Demoulding System. ▲Batching System It includes four parts: silo, screw conveyor, electronic scale and aggregate bunkers. ▲Mixing System It includes two parts: JQ1000 Lightweight aggregate mixer and ZP 120 foam blowing machine. ▲Slurry-infusing System It includes two parts: pressure vessel and air compressor. ▲Molding System The molding system adopts hydraulic pressure as motivate, which has specialty of reasonable structure, easy operation, high productivity, beautiful outlook; the machine is leading the w...