(Compound) heat preserving lightweight wall panel adopts the newly high technology from South Korea, which is produced with the policy of lower investment but higher profit. The production line is made up ofEPS pre-expander machine,JQ2000 lightweight aggregate mixer, ZP120 foam blowing machine, slurry-infusing container, hydraulic wall panel machine, moving automatic stacker It includes five systems:Batching System,Mixing System, Slurry-infusing System, Molding System, and Automatic Demoulding System. ▲Batching System It includes four parts: silo, screw conveyor, electronic scale and aggregate bunkers. ▲Mixing System It includes two parts: JQ1000 Lightweight aggregate mixer and ZP 120 foam blowing machine. ▲Slurry-infusing System It includes two parts: pressure vessel and air compressor. ▲Molding System The molding system adopts hydraulic pressure as motivate, which has specialty of reasonable structure, easy operation, high productivity, beautiful outlook; the machine is leading the w...

Today, Let is talk something about Lightweight sandwich wall panel. Lightweight wall panel is specific produced for modern architecture, ecological residence, frame structure and lower construction, the birth of wall panel marks the renewal of the wall material, new leap has been made in the modernization of wall materials. The birth of this product replaces the traditional block process, it meets the wall material requirements with new energy saving energy and waste building concept and excellent performance of the modern building. Wall panel is composed of cement, fly ash, EPS (expanded polystyrene foam particles), foam agent, and some additives (hydroxymethyl cellulose, reusable dispersion emulsion powder),  mixing with water according to certain proportion, then grouting and forming.face board can use cement board, calcium silicate board, plasterboard or glass magnesium board. Lightweight sandwich wall panel is not only widely used in various kinds of high and multi-storey non...

1.Traditional construction wall materials production and land loss   The traditional construction wall raw materials mainly come from farmland, which requires a lot of soil and large land occupation. At present, There are more than 120,000 domestic clay brick and tile enterprises predominantly in producing solid clay brick. They cover more than 0.83 million acres, and produce nearly 700 billion clay brick each year, occupying 1.4 billion m3 of soil, which is equivalent to destroy 0.2 million acres of soil field. According to the statistics, due to burned clay brick, up to 140,000 hectares of farmland have been damaged since the founding of P.R.C.  2.Traditional construction wall materials production and energy consumption   The energy consumption of clay brick production in China has averaged more than twice in the developed countries, with its architectural exterior wall insulation properties 4-5 times. Based upon the statistics, the current energy consumption of domestic c...

Introduction on raw material of lightweight EPS wall panel     Since ancient times masonry walls are the main component in the housing sector and it has brittle characteristics and exhibit poor performance against the uncertain loads. Further, the structure requires heavier sections for carrying the dead weight of masonry walls. S.L Machinery develops a simple, lightweight and cost effective technology for replacing the existing wall systems. The lightweight concrete is developed for the construction of sandwich wall panel. The EPS beads of 4-6 mm diameter size are mixed with cement concrete and developed a lightweight concrete with a density 9 kN/m³. Sandwich wall panel is composed of cement, fly ash, EPS (expanded polystyrene foam particles), foam agent and additives (such as hydroxymethyl cellulose, reusable dispersion emulsion powder, water reducing agent etc.), mixing with water according to certain proportion, then grouting and forming. The lightweight sandwich pan...

DURING THE INDUSTRIAL REVOLUTION of the 18th and 19th centuries, the basic materials of construction were sparse. There was wood, stone, brick and mortar, and iron and steel. However, the irons and steels of that day were vastly inferior to the ones used today. With the progress of human civilization and the pursuit of a better quality life, today S.L Machinery perfectly combined the technology of Lightweight wall panel material and steel structure by launching the lightweight concrete wall panel making machine.     Lightweight concrete is now an established lightweight building material. It is used not only on account of its light weight but also because of high thermal insulation compared with normal concrete. The lighter the concrete, the larger the insulation properties in general. An earliest application of lightweight concrete was in building industry and for producing insulating screeds. The principal structural use of lightweight concrete is in construction of under b...